FFConfigLite

Diagnose and configure modules in your Ford Focus 2 or C-Max I using an ELM327 or ELS27 interface. These tools provide CAN-bus access to various vehicle systems:

Engine Control Module (ECM):

Access module information, read and clear diagnostic trouble codes (DTCs), reboot the module, and reset the long-term fuel trim (KAM) for the following engine types: ESU-411/418 (1.8 125/2.0 145), SIM28/29 (1.4 80/1.6 100/115), and ESU-121/131 (1.8 120/2.0 145).

Instrument Cluster (Dashboard):

Access module information, read and clear DTCs, configure settings, reboot the module, and adjust or correct the odometer reading.*

Brake Control Module (BCM):

Access module information, read and clear DTCs, configure settings, reboot the module, reset the Dynamic Stability System (DDS) calibration, and perform brake bleeding.*

Body Control Module (BCM):

Access module information, read and clear DTCs, configure settings*, and reboot the module.

Airbag Control Module (ACM) / Restraint Control Module (RCM):

Access module information, read and clear DTCs, configure settings, reboot the module, and clear crash data.*

Transmission Control Module (TCM):

Access module information, read and clear DTCs, and reset the KAM.*

Climate Control Module (CCM):

Access module information, read and clear DTCs.

Audio Control Module:

Access module information, read and clear DTCs, and retrieve the radio code (for M-series)*.

*Some features are only available in the full version of the software.

For full functionality and access to additional modules, a slight modification to your ELM327 adapter may be necessary. Instructions can be found here: Http://forffclub.narod.ru/index/0-2

ELS27 adapters can be purchased at: https://els27.ru/. For ELS27USB, set the baud rate to 38400; for ELS27BT, use the ELS27 Baudrate utility to set it to 2,000,000.